15. REAR BRAKE/REAR FORK/REAR WHEEL/REAR SHOCK ABSORBER GRAND DINK 250 Rear Brake Disk REAR WHEEL REMOVAL Remove the exhaust muffler. ( 2-6) Remove the rear brake caliper. ( 15-3) Remove the rear fork. Remove the rear axle collar. Remove the rear wheel. Rear Axle Collar INSPECTION Measure the rear wheel rim runout. Service Limits: Radial: 1.0mm replace if over Axial: 1.0mm replace if over Shock Absorber Lower Mount Bolt INSTALLATION The installation sequence is the reverse of removal. Torque: Rear shock absorber lower mount bolt: 19.629.4N-m Rear axle nut: 78.498N-m Brake Caliper Bolts Axle Nut C ADJUSTABLE REAR CUSHION To suit scooter behaviour to load condition rear cushion could be adjusted in spring prelocad. 5 4 It is possible to adjust rear cushion in five 3 positions: 2 A position "soft" 1 B position "medium" C position "hard" When you adjust rear cushion, the spring preload of rear cushions must be the same. A B 15-6