kxr maxxer 250 300 Workshop-manual : Page 48

          3. INSPECTION/ADJUSTMENT                                                  ATV 300/250

                                                                             Upper Level
  ENGINE OIL
  OIL LEVEL
  Place the machine on a level place.
  Warm up the engine for several minutes and
  stop it.
      Run the engine for 23 minutes and
      check the oil level after the engine is
      stopped for 23 minutes.

  Check the oil level through the inspection          Inspection Window     Lower Level
  window.
  The oil level should be between the
  maximum (H) and minimum (L) marks. If
  the level is low, add oil to raise it to the
  proper level.


                                                      Oil Fill Cap
  ENGINE OIL REPLACEMENT
  Place the machine on a level place.
  Warm up the engine for several minutes and
  stop it.
  Place a container under the engine.
  Remove the oil fill cap and drain plug to
  drain the oil.




  Reinstall the drain plug and tighten the
  drain plug to specification.

  Torque: 2.5 kgf-m (25 N-m, 18 lbf-ft)

  Fill the engine with oil and install the oil fill
  cap.

 The engine oil will drain more easily
    while the engine is warm.
                                                      Drain Plug
  Oil Capacity:
  At disassembly:
               1.6 liter (1.4 lmp qt, 1.7 Us qt)
  At change: 1.4 liter (1.23 lmp qt, 1.48 Us
  qt)

3-9