13. BRAKE SYSTEM MXU 300/250 Bleed Valve (Front Left Lever) BRAKE FLUID REFILLING Connect a transparent hose and syringe to the brake caliper bleed valve and then loosen the bleed valve nut. Fill the brake reservoir with brake fluid and use the syringe to draw brake fluid into it until there is no air bubbles in the hose. Then, tighten the bleed valve nut. Torque: 0.6 kgf-m (6 Nm, 4.32 lbf-ft) MXU 250 Reservoir (Front Left Lever) · When drawing brake fluid with the syringe, the brake fluid level (pedal) should be kept over 1/2 of the brake reservoir height. · Use only the recommended brake fluid. Reservoir (Front Left Lever) MXU 300 Bleed Valve (Front Left Lever) Reservoir Cover (Pedal) Recommended Brake Fluid: DOT-4 Reservoir (Pedal) Reservoir Protection Cover 13-14