2. FRAME COVERS/EXHAUST MUFFLER MXU 300/250 Fuel Tank Cap/Fuel Tank Seal FUEL TANK COVER REMOVAL/INSTALLATION Remove the front center cover (see page 2- 7). Remove the four screws from the fuel tank cover. Remove the fuel tank cap by turning it counterclockwise and fuel tank seal, then remove the fuel tank cover. Put on the fuel tank cap after removing Screws the cover to prevent duct, mud, etc. from entering the fuel tank Installation is in the reverse order of removal. Headlight Connectors FRONT FENDER REMOVAL/INSTALLATION Remove front carrier (see page 2-4), front center cover (see page 2-7), fuel tank cover (see page 2-8) and right/left side cover (see page 2-6). Disconnect the right and left headlight connectors. Drive Select Lever Grip Air Inlet Hose Remove the bolt and drive select lever grip. Remove the two screws and disconnect the air inlet hose. Bolt Screws 2-8