3. INSPECTION/ADJUSTMENT MXU 300/250 Tie-rod End Nuts · Be sure that both tie-rod are turned the same amount. If not, the machine will drift tight or left even though the handlebar is positioned straight which may lead to mishandling and accident. · After setting the toe-in to specification, run the machine slowly for some distance with hands placed lightly on the handlebar and check that the handlebar responds correctly. If not, turn either the right or left tie-rod within the toe-in specification. Tie-rod WHEELS/TIRES Check the tires for cuts, imbedded nails or other damages. Check the tire pressure. Tire pressure should be checked when tires are cold. TIRE PRESSURE 1 Rider Front 0.28 kgf/cm (28 Kpa, 3.2 psi) Rear 0.28 kgf/cm (28 Kpa, 3.2 psi) TIRE SIZE Front : 22*7-10 Rear : 22*10-10 Front Axle Nut Check the front axle nut for looseness. 3-19