Choose your country
We work in partnership with many official Kymco dealers around the world.
You can select the country of your choice from the list below, whatever your choice, we can deliver worldwide!
16. INSTRUMENT/SWITCHES/LIGHTS SUPER 9 50
INSTALLATION Tab
The installation sequence is the reverse of
removal.
· Align the tab on the fuel unit with the
groove on the fuel tank.
· Turn the retainer clockwise to secure it.
Groove
OIL METER B Float Oil Meter
INSPECTION
Remove the met-in box. ( 2-2)
Remove the frame body cover. ( 2-2)
Disconnect the oil meter wire connectors and
remove the oil meter. Keep the oil meter
float at the lower position.
Measure the resistances between the wire
terminals as and shown in the left
figure.
Wire Terminals Resistance
Green/Red(+)Black(-) 516
Green(-)Black(+) G/R G
Before removing the oil meter, be sure
to drain the motor oil and do not allow
sparks or flames near the working area.
Oil Meter Operation Inspection
Connect the oil meter wire connectors and
turn the ignition switch ON.
Measure the resistance between the wire
terminals with the float at upper position.
Green/Red(+)Black(-) About 340 Light OFF
4.51.0mm
Before performing the following test,
Light ON
operate the turn signals to determine
that the battery circuit is normal.
16-3