movie 125 euro 3 Workshop-manual : Page 117

          10. FINAL REDUCTION                                                      MOVIE SYSTEM


 Install the countershaft and gear into the left
 crankcase.
 Install the countershaft.
 Install the dowel pins and a new gasket.




                                                   Countershaft

 Install the transmission case cover.




                                                                   Transmission Case Cover
 Install and tighten the transmission case cover
 bolts.
 Install the clutch/driven pulley.
 Install the rear wheel.
 Install the rear brake cable.


 After installation, fill the transmission case
 with the specified oil.

   · Place the motorcycle on its main stand
     on level ground.
   · Check the oil sealing washer for wear                                      Bolts
     or damage.

 Specified Gear Oil:
 KYMCO SIGMA GEAR OIL 90#
 Oil Capacity:
    At disassembly : 0.2 liter
    At change          : 0.18 liter
 Install and tighten the oil check bolt.
 Torque: 1.01.5kg-m
 Start the engine and check for oil leaks.
 Check the oil level from the oil check bolt
 hole and add the specified oil to the proper
 level if the oil level is low.                      Drain Bolt Oil Check Bolt Hole/Oil Filler


10-5