7. CYLINDER HEAD/VALVES MOVIE SYSTEM Cam Chain Camshaft Gear CAMSHAFT INSTALLATION Turn the flywheel so that the "T" mark on the flywheel aligns with the index mark on the crankcase. Keep the round hole on the camshaft gear facing up and align the punch marks on the camshaft gear with the cylinder head surface (Position the intake and exhaust cam lobes down.) and install the camshaft onto the cylinder head. Install the cam chain over the camshaft gear. Round Hole Punch Marks Dowel Pins Install the dowel pins. Camshaft Holder Nut Install the camshaft holder, washers and nuts on the cylinder head. Tighten the four cylinder head nuts and two bolts. Torque: Cylinder head nut: 2.0kg-m · Apply engine oil to the threads of the cylinder head nuts. · Diagonally tighten the cylinder head nuts in 23 times. Washer Adjust the valve clearance. Turn the cam chain tensioner screw counter-clockwise to release it. Tensioner Screw 7-10