13. A.C. G/STARTER CLUTCH MYROAD 700i ALTERNATOR STATOR RIGHT CRANKCASE COVER REMOVAL Remove the exhaust muffle. Remove water pump. Remove bolts and right crankcase cover. Tightened Torque: 0.8~1.2 kgf·m Grommet Bolts stator Remove the two pulse coil mount bolts. Remove the three stator mount bolts, grommet and the stator from the right crankcase cover. INSTALLATION Install the stator and tighten the stator mount CPS Bolts bolts to the specified torque. Torque: 0.8~1.2 kgf·m Apply sealant to the grommet seating surface and install it to the cover groove properly. Dowel Pins Install the pulse coil and tighten mount bolts to the specified torque. Torque: 0.8~1.2 kgf·m Clean the mating surfaces of the right crankcase and cover. Install the dowel pins Apply with liquid gasket. Install the right crankcase cover and tighten the bolts in a crisscross pattern in 2 or 3 steps. 13-3