Choose your country
We work in partnership with many official Kymco dealers around the world.
You can select the country of your choice from the list below, whatever your choice, we can deliver worldwide!
1. GENERAL INFORMATION PEOPLE 125/150
SPECIFICATIONS
Name & Model No. PEOPLE 150 Air cleaner type & No Paper element
Fuel System
Overall length (mm) 1950 Fuel capacity 6.8 liters
Carburetor
Overall width (mm) 690 Type VE
Overall height (mm) 1075 Piston dia. (mm) 24
Wheel base (mm) 1335 Venturi dia.(mm) 22.1 equivalent
Engine type O.H.C. Throttle type Butterfly type
Electrical Equipment Power Drive System
Displacement (cc) 150 Type CDI
Ignition System
Fuel Used 92# nonleaded gasoline Ignition timing 15°~28°BTDC/1700rp
Front wheel 41 Contact breaker Non-contact point type
Net weight (kg) Rear wheel 70
Spark plug NGK C7HSA
Total 111
Front wheel 65 Spark plug gap 0.6 0.7mm
Gross weight(kg) Rear wheel 116 Battery Capacity 12V6AH
Total 181 Clutch Type Dry multi-disc clutch
sion Gear Gear
Transmis- Reduction
Tires Front wheel 80/80-16 45P Type Non-stage transmission
Rear wheel 100/80-16 56P Automatic centrifugal
Operation
Ground clearance (mm) 160 Type
Perform- Braking distance (m) 4.4 (30km/h) Type Two-stage reduction
ance Min. turning radius (m) 2 Reduction 1st 0.86~2.64
Starting motor & ratio 2nd 10.98
Starting system kick starter
Front Caster angle 25°
Type OHC air cooled 4-cycle
Moving Device
Axle Trail length
Cylinder arrangement Single cylinder
Combustion chamber type Semi-sphere Tire pressure Front 1.75
(kg/cm) Rear 2.00 (2.25)
Valve arrangement O.H.C., chain drive
Bore x stroke (mm) 57.4 x 57.8 Turning Left 45°
Compression ratio 9.2:1 angle Right 45°
Compression pressure Brake system Front Disk brake
(kg/cm) 15
type Rear Drum brake
Max. output (ps/rpm) 10.5/7500
Engine
Suspension Front Telescope
Device
Damping
Max. torque (kg m/rpm) 1.1/5500 type Rear Swing arm
Intake Open 7.3
Valve (mm) Close 0 Shock absorber Front Telescope
type Rear Swing arm
timing Exhaust Open 6.9
(mm) Close 0 Frame type Steel pipe
Valve clearance Intake 0.10
(cold) (mm) Exhaust 0.10
Idle speed (rpm) 1700rpm
Lubrication type Forced pressure &
System
Lubrication
wet sump
Oil pump type Inner/outer rotor type
Oil filter type Full-flow filtration
Oil capacity 0.91 liter
Exchanging capacity 0.81 liter
Cooling Type Forced air cooling
1-4