people 250 s Workshop-manual : Page 58

          3. INSPECTION/ADJUSTMENT                                    PEOPLE/PEOPLE S 250

                                                                Air Cleaner Case Cover
 AIR CLEANER
 Remove the six air cleaner case cover screws
 and the cover.




                                                           Screws
                                                           Air Cleaner Element
 Remove the air cleaner element.
 Check the element and replace it if it is
 excessively dirty or damaged.

 CHANGE INTERVAL
 More frequent replacement is required when
 riding in unusually dusty or rainy areas.
 · The air cleaner element has a viscous
      type paper element. Do not clean it
      with compressed air.
    · Be sure to install the air cleaner
      element and cover securely.

 SPARK PLUG
 Remove the met-in box and center cover.
 Remove the spark plug cap and spark plug.
 Check the spark plug for wear and fouling
 deposits.
 Clean any fouling deposits with a spark plug
 cleaner or a wire brush.




                                                                     Spark Plug

 Specified Spark Plug: NGK: DPR7EA9
 Measure the spark plug gap.
 Spark Plug Gap: 0.7mm                                              Cracks
                                                                    Damage
 · When installing, first screw in the spark
      plug by hand and then tighten it with a                         Deformation
      spark plug wrench.
                                                Gap
 Torque:14.719.6N-m                             Wear
                                                      
                                                Fouling
                                                Deposits
                                                                    0.9mm




3-5