zx scout 50 Workshop-manual : Page 38

          3. LUBRICATION SYSTEM

 ELECTRICAL EQUIPMENT
 IGNITION APPARATUS                               Gap, Wear and
                                                  Fouling Deposits             0.6-0.7mm
 Spark Plug
 Remove the frame center cover.
 Remove the spark plug cap and spark plug.
 Check the spark plug for wear, fouling and                                    Washer Damage
 carbon deposits.
 Remove the fouling and carbon deposits
 with a spark plug cleaner or wire brush.                Cracks
 Specified Spark Plug

 BR8HSA

                                                                        Bolt

 Spark Plug Gap: 0.60.7mm
 Ignition Apparatus
The CDI ignition timing is not adjust-
   able. If the timing is incorrect, check
   the CDI unit, ignition coil and A.C.
   generator and replace any faulty parts.

 Remove the right side rail. ( 12-4)
 Remove the A.C. generator fan cover.
 ( 7-3)
 Remove the four bolts attaching the fan and
 then remove the fan.
 Warm up the engine and check the ignition
 timing with a timing light.

                                                                  Index Mark

 When the engine is running at the specified
 rpm, the ignition timing is correct if the "F"
 mark on the flywheel aligns with the index
 mark on the crankcase within 2°.
 Ignition Timing:
  15.5°2°BTDC/2000rpm




                                                                   F Mark




3-7