agility city 125 Workshop-manual : Page 166

          15. IGNITION SYSTEM                                                       AGILITY CITY 125


    PULSER COIL
    INSPECTION
 This test is performed with the stator
      installed in the engine.

    Remove the frame body cover. ( 2-3)
    Disconnect the A.C. generator connector.


                                                    Pulser Coil Coupler



    Measure the pulser coil resistance between
    the blue/yellow and green wire terminals.
    Resistance: 80160
    Refer to page 14-6 for the A.C. generator
    removal.




                                                    Timing Hole Cap

    IGNITION TIMING INSPECTION
 The CDI unit is not adjustable.         If the
      ignition timing is incorrect, inspect the
      CDI unit, pulser coil and A.C. generator
      and replace any faulty parts.

    Remove the timing hole cap.




    Warm up the engine and check the ignition
    timing with a timing light.
    When the engine is running at the ignition
    timing is correct if the "F" mark aligns with
    the index mark within 2°.
    Ignition Timing: BTDC28°/4000rpm




                                                             "F" Mark
5