ck pulsar 125 Workshop-manual : Page 25

          2. INSPECTION/ADJUSTMENT                                                     Pulsar   CK   125


 SERVICE INFORMATION
 GENERAL

   WARNING
 ·Before running the engine, make sure that the working area is well-ventilated. Never run the
  engine in a closed area. The exhaust contains poisonous carbon monoxide gas which may
  cause death to people.
 ·Gasoline is extremely flammable and is explosive under some conditions. The working area
  must be well-ventilated and do not smoke or allow flames or sparks near the working area or
  fuel storage area.


 SPECIFICATIONS
 ENGINE                                             CHASSIS
 Throttle grip free play : 26mm                     Front brake lever free play : 1020mm
 Spark plug gap            : 0.60.7mm               Rear brake pedal free play : 2030mm
 Spark plug specification : NGK-DR8EA               Brake fluid: DOT-4
 Valve clearance : IN: 0.08mm
                    EX: 0.08mm
 Cylinder compression : 13kg/cm
 Compression ratio         : 9.0:1

 Ignition timing          : 34.52°/4000rpm
 Idle speed               : 1400100rpm
 Engine oil capacity: At disassembly : 1.0 liter
                      At change      : 0.9 liter


 TIRE PRESSURE

                                        1 Rider                   2 Riders
            Front                    1.75 kg/cm                 2.0 kg/cm
            Rear                     1.75 kg/cm                 2.25 kg/cm

 TIRE SIZE:
   Front : 3.00­18
   Rear : 3.25­17


 TORQUE VALUES
  Front axle nut 5.57.0kg-m
  Rear axle nut  6.08.0kg-m


2-1