ck pulsar 125 Workshop-manual : Page 40

          3. LUBRICATION SYSTEM                                                         Pulsar   CK   125

                                                                   Outer Rotor         Gasket
 ASSEMBLY
 Install the outer rotor and inner rotor into the
 pump body. Insert the pump shaft.
 Insert the pump shaft by aligning the flat
    on the shaft with the flat in the inner
    rotor.
 Install the gasket and pump cover.
 Tighten the screws.
 After installation, make sure that the pump
 shaft rotates freely.                               Pump Body             Inner Rotor Pump Cover


 INSTALLATION
 First install the two O-rings.
 Install the oil pump and tighten the two
 mounting bolts.
 Be sure to install the two O-rings and
    apply some engine oil to them.

 Torque: 0.40.8kg-m

                                                           Bolts                     O-rings


                                                       Nut Socket Wrench    Oil Filter Rotor Cover
 Install the oil filter rotor and tighten the lock
 nut.
 Torque: 4.05.0kg-m
 During installation, install the washer
    with the mark "OUTSIDE" facing up.
 Install the right crankcase cover.


                                                     Lock Nut




3-5