kpw 125 Workshop-manual : Page 189

          18. LIGHTS/INSTRUMENTS/SWITCHES/HORN/
    FUEL UNIT                                                 K-PIPE 125



 FUEL UNIT
     No Smoking
 REMOVAL
 Remove the seat.(Refer to 4-10.)
 Disconnect the fuel unit wire connectors.
    Do not damage the fuel unit wire.
 Remove the fuel unit.                                 Fuel Unit
 Be careful not to bend or damage the
   fuel unit float arm.


                                                L/W   Y/W

 INSPECTION
 Remove the fuel unit.
 Measure the resistance between the fuel unit
 wire terminals with the float at upper and
 lower positions.
  Wire Terminals          Upper      Lower
     G~Y/W                36         700 
     G~L/W                550        160 
     Y/W~L/W              600        600 
                                                 G




 FUEL GAUGE INSPECTION
 Connect the fuel unit wire connectors and
 turn the ignition switch "ON"

   Before performing the following test,
   operate the turn signals to determine that
   the battery circuit is normal.
 Check the fuel gauge needle for correct
 indication by moving the fuel unit float up
 and down.

     Float Position          Needle Position
         Upper                 "F"(Full)
        Lower                 "E"(Empty)

18-7