2. FRAME COVERS/EXHAUST MUFFLER ATV 150/125 Screws Screws FUEL TANK COVER REMOVAL/INSTALLATION Remove the front center cover (see page 2- 12). Remove the four screws and two nuts from the fuel tank cover. Remove the fuel tank cap by turning it counterclockwise and fuel tank seal, then remove the fuel tank cover. Put on the fuel tank cap after removing Nuts Fuel Tank Cap the cover to prevent duct, mud, etc. from entering the fuel tank Installation is in the reverse order of removal. FRONT FENDER REMOVAL/INSTALLATION Remove front carrier (see page 2-9), front center cover (see page 2-12), fuel tank cover (see page 2-13) and right/left side cover (see page 2-11). Disconnect the right and left headlight connectors. Headlight Connectors Screw/Air Filter Cover Remove the screw and air filter cover. Disconnect the air inlet hose from the front fender. Remove the bolt and drive select lever grip. Remove the nut, then remove the front fender Nut Bolt/Grip 2-13