10. A.C. GENERATOR/STARTER CLUTCH GRAND DINK 125/150 STATOR INSTALLATION A.C. Generator Stator Screws Install the A.C. generator stator on the right crankcase cover and secure it with the three bolts. Install the pulser coil on the right crankcase cover and secure it with the two screws. Install the wire grommet in the groove in the right crankcase cover securely. Be sure to route the stator wire under the pulser coil. Pulser Coil Dowel Pins RIGHT CRANKCASE COVER INSTALLATION Install the two dowel pins and a new gasket. Gasket Right Crankcase Cover Install the right crankcase cover over the crankcase, aligning the water pump shaft groove with the oil pump shaft. Tighten the nine right crankcase cover bolts. Connect the water hoses to the right crankcase cover. Add the recommended engine oil. ( 4-3) Fill the cooling system with the specified coolant. ( 3-9) · Be sure to bleed air from the water jacket after filling the coolant. Oil Pump Shaft Water Pump Shaft 10-6