13-2 CARBURETOR GRAND DINK125/150DINK125B&W125 Measure the resistance between the auto choke wire terminals. Resistance: 10 below (10 minutes minimum after stopping the engine) If the reading is not within the limit, replace the auto bystarter with a new one. Connect a hose to the fuel enriching circuit of the carburetor. Connect the auto choke yellow wire to the positive (+) terminal of a battery and green/black wire to the negative (-) terminal. Wait 5 minutes and blow the hose with mouth. If the passage is blocked, the auto bystarter is normal. Disconnect the auto bystarter from the battery. Wait 30 minutes and blow the hose with mouth. If air can be blown into the hose, the auto bystarter is normal. NSTALLATION Install the auto bystarter and set plate. Install and tighten the two screws. Auto bystarter/Set Plate 13-2-16