8. DRIVE AND DRIVEN PULLEYS/ KICK STARTER GRAND DINK 125/150 Drive Pulley Face Install the drive pulley face, washer and drive face nut. Washer Drive Face Nut Universal Holder Hold the drive pulley with the universal holder and tighten the drive face nut. Torque: 49.058.5N-m Special Universal Holder · Do not get oil or grease on the drive belt or drive pulley faces. Drive Pulley Clutch Outer CLUTCH/DRIVEN PULLEY Remove the left crankcase cover. ( 8-3) Remove the drive pulley and drive belt. ( 8- 4) Hold the clutch outer with the universal holder and remove the clutch outer nut. Special Universal Holder Remove the clutch outer. Universal Holder INSPECTION Inspect the clutch outer for wear or damage. Measure the clutch outer I.D. Service Limit: 130.5mm replace if over 8-8