grand dink 250 Workshop-manual : Page 112

          10. A.C. GENERATOR/STARTER CLUTCH                                       GRAND DINK 250

                                                                Bolts     Water Inlet Hose
 RIGHT CRANKCASE COVER
 REMOVAL
 Disconnect the water hoses from the right
 crankcase cover.
 Remove the nine bolts attaching the right
 crankcase cover and the cover.




                                                                          Water Outlet Hose
                                                A.C. Generator Stator               Screws
 STATOR REMOVAL
 Remove the two pulser coil attaching screws
 and the pulser coil.
 Remove the three A.C. generator stator bolts
 and the stator.
 When removing the pulser coil and
   stator, be careful not to damage them to
   avoid shorted or broken wire.

                                                               Bolts         Pulser Coil

                                                                Flywheel Holder
 FLYWHEEL REMOVAL
 Hold the flywheel with a flywheel holder and
 remove the flywheel nut.




                                                          Flywheel            Nut
                                                        Flywheel Puller
 Remove the flywheel with a flywheel puller.




10-3