grand dink 250 Workshop-manual : Page 132

          12. COOLING SYSTEM                                                               GRAND DINK 250


                                                                         Radiator
 RADIATOR INSTALLATION
 Install the radiator on the radiator bracket
 with the two bolts and one nut.




                                                         Bolts                   Nut
                                                  .

                                                              Upper Hose
 Connect the upper and lower hoses and
 secure them with hose bands.
 Connect the thermostatic switch wire and
 fan motor wire couplers.




                                                      Thermostatic Switch Wire         Lower Hose



                                                         Overflow Tube
 Connect the overflow tube and secure with
 the tube clamp.
 Fill the radiator with coolant. ( 3-9)
 Connect the vent tube to the radiator filler.
 After installation, check for coolant leaks.

  If you want to refill the coolant , the
     following procedure must be checked.
     1. Please make the radiator filler and the
        air vent tube to be separated.
     2. Then start the engine , filled in the
        coolant till the coolant flowed out
        from the air vent tube.
     3. Put the air vent tube on.                                                   Air Vent Tube


                                                                                              12-8