18. MOVIE CARBURETOR EURO 3 MOVIE SYSTEM Measure the resistance between the auto choke wire terminals. Resistance: 10 below (10 minutes minimum after stopping the engine) If the reading is not within the limit, replace the auto auto choke with a new one. Connect a hose to the fuel enriching circuit of the carburetor. Connect the auto choke yellow wire to the positive (+) terminal of a battery and green/black wire to the negative (-) terminal. Wait 5 minutes and blow the hose with mouth. If the passage is blocked, the auto choke is normal. Disconnect the auto choke from the battery. Wait 30 minutes and blow the hose with mouth. If air can be blown into the hose, the auto choke is normal. INSTALLATION Install the auto choke and set plate. Install and tighten the two screws. Auto Choke/Set Plate 18-16