18. BATTERY/CHARGING SYSTEM MYROAD 700i Screws BATTERY REMOVAL/INSTALLATION Unlock and open the seat. Turn ignition switch OFF. Remove the screws and battery box cover. Battery Box Cover Remove the battery retainer. Positive Terminal Negative Terminal With the ignition switch to "OFF" disconnect the negative (-) terminal lead from the battery first, then disconnect the positive (+) terminal lead. Pull out the battery from the battery box. Installation is in the reverse order of removal. After connecting the battery cables, coat the terminals with grease. Battery VOLTAGE INSPECTION Remove the battery cover (see above). Measure the battery voltage using a commercially available digital multimeter. Voltage (20C/68C): Fully charged: 13.013.2 V Under charged: below 12.3 V 18-5