people 250 s Workshop-manual : Page 68

          4. LUBRICATION SYSTEM                                                     PEOPLE/PEOPLE S 250


                                                                                     Oil Dipstick
  ENGINE OIL/OIL FILTER
 · Place the scooter upright on level
      ground for engine oil level check.
    · Run the engine for 23 minutes and
      check the oil level after the engine is
      stopped for 23 minutes.

  Remove the oil dipstick and check the oil
  level with the oil dipstick.
  If the level is near the lower level, fill to the
  upper level with the recommended engine oil.
  OIL CHANGE
 · The engine oil will drain more easily
     while the engine is warm.

  Remove the oil drain bolt located at the left
  side of the engine to drain the engine oil.
  After the oil has been completely drained,
  install the aluminum washer and tighten the
  oil drain bolt.
  Torque: 14.7N-m
  Pour the recommended oil through the oil
  filler hole.
                                                                                  Oil Drain Bolt

  OIL FILTER SCREEN
  Drain the engine oil.
  Remove the oil filter screen cap.
  Remove the oil filter screen and spring.
  Check the oil filter screen for clogging or
  damage and replace if necessary. Check
  the filter screen O-ring for damage and
  replace if necessary.
  Install the oil filter screen, spring, O-ring and
  filter screen cap.
  Torque: 12.7N-m
  Recommended Oil: SAE15W40# API: SJ                                         Oil Filter Screen Cap
      Oil Capacity:
                                                                                      Spring
        At disassembly: 1.1 liter
        At change:          0.9 liter
  Start the engine and check for oil leaks.
  Start the engine and let it idle for few minutes,
  then recheck the oil level.




                                                      Oil Filter Screen

4-3