super 8 50 2t 1 Workshop-manual : Page 145

          13.STEERING HANDLEBAR/FRONT WHEEL/FRONT BRAKE/FRONT SHOCK
ABSORBER/FRONT FORK                                                        SUPER8 50 2T
                                                     Fixed-Reed

 Install the brake pads in the reverse order of
 removal.
 Tighten the brake pad pin bolt.
 Torque: 1.52.0kg-m

   Keep grease or oil off the brake pads to
   avoid brake failure.




                                                              Brake Pads


 BRAKE DISK
 Measure the brake disk thickness.
 Service Limit: 3.0mm
 Measure the brake disk runout.
 Service Limit: 0.3mm

 BRAKE MASTER CYLINDER
 REMOVAL
 First drain the brake fluid from the hydraulic
 brake system.
                                                                  Master Cylinder
 · When servicing the brake system, use
     shop towels to cover rubber and plastic
     parts and coated surfaces to avoid
     being contaminated by brake fluid.
   · When removing the brake fluid tube
     bolt, be sure to plug the tube end to
     avoid brake fluid leakage.


 DISASSEMBLY
 Remove the piston rubber cover and snap
 ring from the brake master cylinder.




                                                  Remove the main piston and spring from the
                                                  brake master cylinder.
                                                  Clean the inside of the master cylinder and
                                                  brake reservoir with brake fluid.
                                                                      Snap Ring

13-9