super 8 50 2t 1 Workshop-manual : Page 150

           13.STEERING HANDLEBAR/FRONT WHEEL/FRONT BRAKE/FRONT SHOCK
 ABSORBER/FRONT FORK                                      SUPER8 50 2T


  INSPECTION
  Inspect the following items and replace if
  necessary.
  ·Front shock absorber tube bending or
   damage.
  ·Weak front shock absorber spring.
  ·Damper and damper rod bending.
  ·Oil seal damage or wear.




INSTALLATION                                      Mount Boot
  Install the front shock absorbers onto the
  steering stem.
  Install and tighten the front shock absorber
  upper mount bolts.
  Tighten the lower mount bolts.
 Align the upper mount bolt hole with the
     groove on the front fork.
     Front shock absorbers are installed at
     the same altitude.

  Install the front wheel.

  STEERING HANDLEBAR                             Brake Master Cylinder

  REMOVAL
  Remove the handlebar covers. ( 2)
  Remove the rear brake lever holder bolt to
  remove the holder.
  Remove the front brake master cylinder
  holder bolts to remove the brake master
  cylinder.




                                                  Bolts

                                                                  13-14