ck pulsar 125 Workshop-manual : Page 129

          12. REAR WHEEL/BRAKE/SUSPENSION                                        Pulsar   CK   125


 ASSEMBLY
 Assemble the rear shock absorber in the
 reverse order of disassembly.

   · Apply locking agent to the lock nut
     threads and tighten the lock nut.
   · Install the shock absorber spring with
     closely wound coils facing up.

 Torque: 1.92.8kg-m



                                                     Upper Mount Nut
 INSTALLATION
 Depress the motorcycle to install the left and
 right rear shock absorbers.
 Tighten the shock absorber upper mount nuts
 and lower mount nuts.
 Torque: 3.04.0kg-m




                                                                         Lower Mount Nut


 REAR FORK
 REMOVAL
 Remove the rear wheel. (Refer to 12-3.)
 Remove the rear shock absorbers. (Refer to
 12-8.)
 Remove the rear fork pivot nut to remove the
 pivot and rear fork.



                                                                        Rear Fork Pivot Nut




 Remove the drive chain slider and check for
 wear or damage.


   When replacing the rear fork pivot
   bushings, press in the new bushings to
   make them flush with the rear fork.

                                                  Pivot Bushing        Slider

12-9