Choose your country
We work in partnership with many official Kymco dealers around the world.
You can select the country of your choice from the list below, whatever your choice, we can deliver worldwide!
8. STARTER MOTOR/GENERATOR/LEFT CRANK-
CASE COVER/STARTER CLUTCH/CAMSHAFT Pulsar CK 125
STARTER MOTOR REMOVAL
Remove the two starter motor mounting
bolts and the motor.
Inspect the starter motor O-ring for damage
or deterioration.
Inspect the starter motor pinion for wear or
damage.
Mounting Bolts
Bolts Shaft Reduction Gear O-ring
Remove the three bolts attaching the starter
motor reduction gear cover.
Remove the reduction gear cover.
Remove the reduction gear, shaft and
washers.
Inspect the reduction gear for wear or
damage.
Inspect the reduction gear cover O-ring for
damage or deterioration.
Reduction Gear Cover Pin Washers Cover
Reduction Pinion
LEFT CRANKCASE COVER/
GENERATOR REMOVAL
Disconnect the neutral light switch wire.
Remove the eight left crankcase cover bolts.
Remove the left crankcase cover and two
dowel pins.
Clean off all gasket material from the left
crankcase cover.
Remove the reduction pinion.
Bolts Washers
Neutral Light
Wire
Flywheel Lock Bolt Flywheel Puller
Hold the flywheel with a flywheel holder.
Remove the flywheel lock bolt.
Remove the flywheel using a flywheel
puller.
Flywheel Holder Flywheel Holder Flywheel
8-2