mxer mxu 150 Workshop-manual : Page 163

          12. FRONT WHEEL/FRONT BRAKE/FRONT
    SUSPENSION/STEERING SYSTEM                                                  ATV 150/125


 SERVICE INFORMATION
 GENERAL INSTRUCTIONS
 · Remove the machine frame covers before removing the front wheel. Jack the machine front
   wheel off the ground and be careful to prevent the machine from falling down.
 · During servicing, keep oil or grease off the brake drum and brake linings.
 · Inspect the brake system before riding.

 SPECIFICATIONS                                                                     mm (in)
                        Item                              Standard        Service Limit
 Front wheel rim run out                Radial                       2 (0.08)
                                        Axial                        2 (0.08)
 Front brake drum I.D                              110 (4.4)         111 (4.44)
 Front brake lining thickness                      4 (0.16)          1.5 (0.06)
 Tie rod length                                    266.5 (10.66)                
 Rod-end (tie rod) angle                           180                          



 TORQUE VALUES
 Steering stem nut             7 kgf-m (70 N-m, 50 lbf-ft)
 Swing arm nut                 4.5 kgf-m (45 N-m, 32 lbf-ft)
 Front wheel nut               4.5 kgf-m (45 N-m, 32 lbf-ft)
 Front wheel hub nut           7 kgf-m (70 N-m, 50 lbf-ft)
 Front shock absorber upper
 mount bolt                    4 kgf-m (40 N-m, 29 lbf-ft)
 Front shock absorber lower
 mount bolt                    4 kgf-m (40 N-m, 29 lbf-ft)




                                                                                          12-2