mxer mxu 150 Workshop-manual : Page 171

Microfiches
Image preview

Page 169

Image preview

Page 170

Image preview

Page 172

Image preview

Page 173

1 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170 175 180 185 190 195 200 205 210 215 220 225 230 235 240 244
          12. FRONT WHEEL/FRONT BRAKE/FRONT
    SUSPENSION/STEERING SYSTEM                                              ATV 150/125


 INSPECTION
 Check the front arm brackets of the frame.
 If bent, cracked or damaged, repair or
 replace the frame.
 Check the tightening torque of the front
 arms securing nuts.
 Torque: 4.5 kgf-m (45 N-m, 32 lbf-ft)


 Check the front arm side play by moving it
 from side to side.
 If side play noticeable, replace the inner
 collar, bushings and thrust covers as a set.

 Check the front arm vertical movement by
 moving it up and down.
 If vertical movement is tight, binding or
 rough, replace the inner collar, bushings and
 thrust covers as a set.



                                                 Front Arm    Bush   Nuts     Bush
 Remove the two nut and two bolt attaching
 the front arm, then remove the front arm.




                                                 Bolt        Bush                    Bolt



 INSPECTION
 Inspect the shock absorber rod.
 Replace the shock absorber assembly if
 bends or damage.
 Inspect the shock absorber.
 Replace the shock absorber assembly if oil
 leakes.
 Inspect the spring of the shock absorber by
 move the spring up and down.
 Replace the shock absorber assembly if
 fatigue.

                                                                              12-10