13. REAR WHEEL/SWING ARM/
HYDRAULIC BRAKE ATV 150/125
Tighten the two nuts with the nut wrench.
Special tool:
Nut wrench F010
Torque: 12 kgf-m (120 N-m, 86 lbf-ft)
Install wheel hub, plate washer and nut
(wheel hub).
Torque: 7 kgf-m (70 N-m, 50 lbf-ft)
Install cotter pins.
Do not loosen the axle nut after torque
tightening. If the axle nut groove id not
aligned with the cotter pin hole, align
groove with the hole by tightening ut on
the axle nut.
Always use a new cotter pin.
Cotter Pin Washer
When reinstalling a wheel, tighten the
wheel nuts in a crisscross (rather than a
circular) pattern.
Torque: 4.5 kgf-m (45 N-m, 32 lbf-ft)
Axle Nut
MXU 150:
Tapered wheel nuts are used for rear
wheels.
Install the nuts with its tapered side
towards the wheel.
13-13
Fast delivery and good communication ! The parts fit perfectly ! Thank you very much ! 
4.7 / 5