17. INSTRUMENT/SWITCHES/LIGHTS VITALITY 50 Flange INSTALLATION The installation sequence is the reverse of removal. · Align the groove on the fuel unit with the flange on the fuel tank. Groove OIL METER (2-STROKE) INSPECTION Remove the rear body cover. ( 13-6) Oil Meter B G/R B G Disconnect the oil meter wire connectors and remove the oil meter. Keep the oil meter float at the lower position. Measure the resistances between the wire terminals as and shown in the left figure. Wire Terminals Resistance Green/Red(+)Black(-) 46 Green(-)Black(+) Float Before removing the oil meter, be sure to drain the motor oil and do not allow sparks or flames near the working area. 17-3