3. LUBRICATION SYSTEM VITALITY 50 ENGINE OIL REPLACEMENT AND OIL FILTER CLEANING A. Place the machine on a level place. B. Warm up the engine for several minutes and stop it. C. Place a container under the engine. D. Remove the oil filler cap and oil filter cap to drain the oil. Be sure no foreign material enters the crankcase. When removing the drain plug, the compression spring, oil strainer and O-ring will fall out. Take care not to lose these parts. Oil Filler Cap O-ring Spring Oil Strainer E. Clean the oil strainer with solvent. F. Inspect the O-ring and replace if damaged. G. Reinstall the O-ring, oil strainer, compression spring and drain plug. Tighten the drain plug to specification. Torque: 1.02.0kgf-m Before reinstalling the drain plug, be sure to install the O-ring, compression spring and oil strainer. Oil Capacity: At disassembly: 0.85L At change: 0.7L 3-9