grand dink 250 Workshop-manual : Page 47

          3. INSPECTION/ADJUSTMENT                                          GRAND DINK 250

                                                      Oil Check Bolt Hole/Oil Filler
 FINAL REDUCTION GEAR OIL
 · Place the motorcycle on its main stand
     on level ground.
 Stop the engine and remove the oil checks
 bolt.
 The oil level shall be at the oil check
 blowhole.
 If the oil level is low, add the recommended
 oil SAE90# to the proper level.

 Install the oil check bolt.
 · Make sure that the sealing washer is in
     good condition.



 OIL CHANGE
 Remove the oil check bolt.
 Removes the oil drains bolt and drain the oil
 thoroughly.
 Install the oil drain bolt.
 Torque: 9.8N-m
                                                  Oil Drain Bolt/Sealing Washer
 · Make sure that the sealing washer is in
     good condition.

 Fill the final reduction with the recommended
 oil SAE90#.
 Gear Oil Capacity:
    At disassembly : 200cc
    At change        : 180cc
 Reinstall the oil check bolt and check for oil
 leaks.

 DRIVE BELT                                              Drive Belt
 Remove the left crankcase cover.
 Inspect the drive belt for cracks or excessive
 wear.
 Replace the drive belt with a new one if
 necessary and in accordance with the
 Maintenance Schedule.




                                                                                       3-8