12. FRONT WHEEL/SUSPENSION/ STEERING STRYKER 125/150 Remove the two left handlebar switch housing screws, then separate and remove the housing. Remove the two clutch lever holder bolts and the clutch lever holder. Screws Remove the four upper fork bridge bolts to remove the handlebar. Bolts Upper Fork Bridge INSTALLATION Place the handlebar on the upper fork bridge seat, aligning the punch mark on the handlebar with the scribed line on the top of the upper fork bridge seat. Install the upper fork bridge set plates onto the handlebar. First tighten the front bolts and then the rear bolts. Torque: 0.91.3kg-m Upper Fork Bridge Seat Punch Mark 12-5