super 8 50 2t 1 Workshop-manual : Page 118

          11. CARBURETOR                                                           SUPER8 50 2T

                                                     Groove
 Install the throttle valve by aligning the
 groove in the throttle valve with the throttle
 stop screw.




                                                   Throttle Stop Screw


                                                    Carburetor Cap
 Tighten the carburetor cap.
 After installation, perform the following
 adjustments and inspections.
 · Throttle cable free play ( 3-12)
 · Idle speed adjustment ( 3-11)
 Install the met-in box.




                                                  Throttle Cable          Fuel Tube
 CARBURETOR REMOVAL
 Remove the met-in box. ( 12-4)
 Remove the air cleaner by removing the air
 cleaner band screw and attaching bolts.
 Disconnect the fuel tube.
 Loosen the drain bolt to drain fuel from the
 carburetor.
 Disconnect the auto bystarter wire
 connector.
 Remove the two carburetor lock nuts.



                                                       Drain



11-5