zx scout 50 Workshop-manual : Page 167

          15. ELECTRICAL EQUIPMENT                                           ZX / SCOUT 50

 RESISTOR INSPECTION
 Remove the frame front cover. ( 12-3)
 Measure the resistance between the resistor
 B pink wire and ground.
 Measure the resistance between the resistor
 A green/black wire and ground.
 Resistances:
   Resistor A: 9.910.5
   Resistor B: 5.66.2




 REGULATOR/RECTIFIER                                 Resister A    Resister B
 INSPECTION
 Remove the front cover. ( 12-3)
 Disconnect the regulator/rectifier wire
 coupler and remove the bolt to remove the                         Bolt
 regulator/rectifier.

 Measure the resistances between the
 terminals.
 Replace the regulator/rectifier if the
 readings are not within the specifications in
 the table below.




                                                        Coupler   Regulator/Rectifier


                                                 A (Red)             C (Yellow)



       Probe
 Probe(-)      A (R)   B (W)   C (Y)   D (G)
  A (R)                                 
  B (W) 3-10K                           
  C (Y)                                 33-
                                       35K
  D (G)                         33-
                               35K


                                                 B (White)            D (Green)



                                                                                  15-6