16. INSTRUMENT/SWITCHES/LIGHTS ZX / SCOUT 50 INSTALLATION The installation sequence is the reverse of removal. Retainer OIL METER INSPECTION Remove the met-in box. ( 12-4) Oil Meter G/R B Remove the frame body cover. ( 12-4) G G Disconnect the oil meter wire connectors B and remove the oil meter. Keep the oil meter float at the lower position. Measure the resistances between the wire terminals as and shown in the left figure. Wire Terminals Resistance Float Green/Red(+)Black(-) 516 Green(-)Black(+) Oil Meter Operation Inspection Connect the oil meter wire connectors and turn the ignition switch ON. Measure the resistance between the wire terminals with the float at upper position. Light OFF Green/Red(+)Black(-) About 340 4.51.0mm Light ON 16-3