agility city 125 Workshop-manual : Page 58

          5. FUEL SYSTEM                                                      AGILITY CITY 125

CARBURETOR REMOVAL                                     Auto Bystarter
 Remove the frame right side cover. ( 2-4)
 Disconnect the auto bystarter wire
 connector.
 Remove the met-in box. ( 2-3)




                                                     Auto Bystarter Wire
 Loosen the drain screw and drain the fuel
 from the float chamber.
 Disconnect the fuel tube and vacuum tube at
 the carburetor.
 Disconnect the TPS coupler and remove the
 TPS unit




                                                     TPS Unit           Fuel Tube
 Loosen the throttle cable adjusting nut and
 lock nut, and disconnect the throttle cable
 from the carburetor.                                Air Cleaner Connecting Vacuum Tube   Intake Manifold
                                                     Tube Band                             Band
 Loosen the carburetor intake manifold band
 and air cleaner connecting tube band screws
 and then remove the carburetor.




 AUTO BYSTARTER
                                                   Throttle Cable   Adjusting Nut         Lock Nut
 OPERATION INSPECTION
 Measure the resistance between the auto
 bystarter wire terminals.
 Resistance: 10 max. (10 minutes
 minimum after stopping the engine)
 If the reading is not within the limit, replace
 the auto bystarter with a new one.




                                                                                              5-4