Choose your country
We work in partnership with many official Kymco dealers around the world.
You can select the country of your choice from the list below, whatever your choice, we can deliver worldwide!
11. FRONT WHEEL/SUSPENSION/
STEERING Pulsar CK 125
Upper Fork Bridge Mount Bolt
FRONT FORK
REMOVAL
Remove the front wheel. (Refer to 11-6.)
Remove the four front fender bolts and the
front fender.
Loosen the upper and lower fork bridge
mount bolts and then remove the right and
left front forks.
Lower Fork Bridge Mount Bolt
DISASSEMBLY Front Fork Bolt
Place shop towels under the front fork tube.
Use a vise to hold the front fork tube and
remove the bolt.
When removing the front fork bolt, be
careful that the spring in the tube may
spring out.
Front Fork Spring
Remove the front fork spring from the front
fork tube and compress the spring several
times to squeeze out the engine oil.
6mm Socket Spanner
Set the front fork bottom tube in a vise and
place shop towels under it. Remove the
socket head bolt using a socket spanner.
· When using the vise, do not tighten the
front fork bottom tube excessively.
· If it is difficult to remove the socket
head bolt, temporarily install the front
fork spring and front fork bolt.
Remove the front fork piston and return
spring. Remove the front fork bottom tube
and the oil stopper.
11-10