mxer mxu 150 Workshop-manual : Page 67

Microfiches
Image preview

Page 65

Image preview

Page 66

Image preview

Page 68

Image preview

Page 69

1 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170 175 180 185 190 195 200 205 210 215 220 225 230 235 240 244
          3. INSPECTION/ADJUSTMENT                                                            ATV 150/125


                                                                          Lower Level
  ENGINE OIL
  OIL LEVEL
 · Place the motorcycle upright on level
      ground for engine oil level check.
    · Run the engine for 23 minutes and
      check the oil level after the engine is
      stopped for 23 minutes.
  Remove the oil dipstick and check the oil
  level with the oil dipstick.
  If the level is near the lower level, fill to the   Oil Dipstick          Upper Level
  upper level with the specified engine oil.

  OIL CHANGE
 The engine oil will drain more easily
    while the engine is warm.
  Remove the oil drain plug bolt located on
  the bottom of the engine to drain the engine
  oil thoroughly.
  After the oil has been completely drained,
  Install the oil drain plug bolt.

  Torque: 2.5 kgf-m (25 N-m, 18 lbf-ft)                                            oil drain plug bolt
  Recommended Oil:        SAE30#
                                                                 Oil Filler Bolt
  FINAL REDUCTION GEAR OIL

 Place the motorcycle on level ground for
    oil level check.
  Recommended Oil: GEAR OIL SAE90#




                                                                                              3-8