10.FINAL REDUCTION/
TRANSMISSION SYSTEM MXU 300/250
" LCD9L" Mark Lower Gearshift Fork
Apply engine oil to the gearshift fork, sliding
surfaces and gearshift fork pawl.
Install the lower gearshift fork into the clutch
dog (counter axle) groove with its "LCD9L"
mark facing down.
Install the shift cam into the transmission
case, then install the lower gearshift fork
pawl into the shift cam groove.
Shift Cam
Guide Bar "LCD9R" Mark
Apply engine oil to the gearshift fork, sliding
surfaces and gearshift fork pawl.
Install the upper gearshift fork into the clutch
dog (main axle) groove and install the upper
gearshift fork pawl into the shift cam groove
with its "LCD9R" mark facing down.
Install the guide bar.
Install the shift cam
stopper/spring/washer/plug and tighten plug
to specified torque.
Upper Gearshift Fork Plug/Washer/Spring/
Shift Cam Stopper
Torque: 48 N-m (4.8 kgf-m, 35 lbf-ft)
Shift Shaft
Install the shift shaft.
Make sure that the lever on the gear
change switch correctly engages with the
locating slot on the shift shaft.
Align the mark on the shift shaft gear
with the mark on the shift cam gear.
10-38
Fast delivery and good communication ! The parts fit perfectly ! Thank you very much ! 
4.7 / 5