10.FINAL REDUCTION/ TRANSMISSION SYSTEM MXU 300/250 TRANSMISSION CASE COVER / Band Screw SECONDARY DRIVEN BEVEL GEAR ASSEMBLY (MXU 300) REMOVAL Drain transmission gear oil into a clean container. (Refer to the "TRANSMISSION OIL REPLACEMENT" section in the chapter 3) Remove the engine assembly (Refer to the "ENGINE REMOVAL" section in the chapter 6) or remove the rear swingarm (page 15-21). Loosen the joint boot band screw and remove Joint Boot the joint boot from the secondary driven bevel gear. Bolts Remove the four bolts and secondary driven bevel gear assembly. Secondary Driven Bevel Gear Assembly Secondary Driven Bevel Gear Assembly 10-18