5. ENGINE REMOVAL/INSTALLATION VITALITY 50 ENGINE REMOVAL (2-STROKE) Remove the frame body cover. ( 13-6) Disconnect the oil pump control cable from the pump body. ( 4-5) Disconnect the oil inlet line from the oil pump. ( 4-5) After the oil inlet line is disconnected, plug the oil line opening to prevent oil from flowing out. Remove the spark plug cap (1). Disconnect the auto bystarter, A.C. generator and starter motor wire connector (2). Loosen the band screw (1) and remove the two mounting bolts (2), then remove air cleaner housing. Slide the rubber sleeve up to expose the carburetor. Disconnect the fuel tube (2) from the carburetor. Disconnect the fuel vacuum tube from the intake manifold (3). Loosen the carburetor top (1). Remove the carburetor top and throttle valve from the carburetor. ( 12-3) 5-2