2. INSPECTION/ADJUSTMENT ZING125 AIR CLEANER AIR CLEANER REPLACEMENT Remove the right side cover. Remove the two screws attaching the emission control system. Remove the air cleaner case cover's screws and the cover. Remove the air cleaner screen and element. Check the element and replace it with a new one if it is excessively dirty or damaged. Element CHANGE INTERVAL More frequent replacement is required when riding in unusually dusty or rainy areas. · If the air cleaner is installed improperly, dust may be sucked into Dry the cylinder directly to reduce the engine horsepower and affect engine Squeeze out service life. Wash Engine Squeeze out and dry oil and dry · Do not wash the element in any solvent of high vaporability. Spark Plug SPARK PLUG Remove the spark plug. Check the spark plug for wear, damage and fouling deposits. Clean any fouling deposits with a spark plug cleaner or a wire brush. Specified Spark Plug: NGK-CR8E Gap, Wear, and Measure the spark plug gap. Fouling Deposits Spark Plug Gap: 0.60.7mm When installing, first screw in the spark plug by hand and then tighten it with a spark plug wrench. Cracks Washer Damage Deformation 2-4