zing 125 qe Workshop-manual : Page 112

          11. FRONT WHEEL/SUSPENSION/
    STEERING                                                                      ZING II 125

 Place shop towels under the bottom tube             6mm Socket Spanner
 and set it in a vise. Apply locking agent to the
 socket head bolt and then install it into the
 piston. Tighten the socket head bolt using
 the socket spanner.
 When tightening the socket head bolt,
    temporarily install the front fork spring
    and front fork tube.

 Torque: 1.52.5 kg-m



 Apply engine oil to a new oil seal and install
 the oil seal using the fork seal driver.
 Then, install the snap ring and dust seal.




 Fully compress the front fork and fill SAE8#
 engine oil into the front fork tube.
 Do not fill too much engine oil.                                         Specified Oil
                                                                          Level: 140mm

 Specified Capacity: 376cc
 Quality: SAE8                                       Compress




 Install the front fork spring into the front fork
 tube with the closely wound coils facing                                     Front Fork Bolt
 down.
 Install and tighten the front fork bolt.

 Torque: 1.53.0kg-m
 Install the front fork bolt rubber cover.




                                                                                          11-14