5. FUEL SYSTEM MOVIE SYSTEM CARBURETOR REMOVAL Remove the frame body cover. Disconnect the auto bystarter wire connector. Auto Bystarter Wire Loosen the drain screw and drain the fuel Fuel Tube from the float chamber. Disconnect the fuel tube and vacuum tube at the carburetor. Vacuum Tube Air Cleaner Connecting Tube Band Adjusting Nut Lock Nut Loosen the throttle cable adjusting nut and lock nut, and disconnect the throttle cable from the carburetor. Loosen the carburetor intake manifold band and air cleaner connecting tube band screws and then remove the carburetor. Throttle Cable Intake Manifold Band AUTO BYSTARTER OPERATION INSPECTION Measure the resistance between the auto bystarter wire terminals. Resistance: 10 max. (10 minutes minimum after stopping the engine) If the reading is not within the limit, replace the auto bystarter with a new one. 5-3