3. INSPECTION/ADJUSTMENT MOVIE SYSTEM Oil Check Bolt/Sealing Washer FINAL REDUCTION GEAR OIL OIL LEVEL CHECK Place the motorcycle on its main stand on level ground for oil level check. Stop the engine and remove the oil check bolt. The oil level shall be at the oil check bolt hole. If the oil level is low, add the recommended oil to the proper level. Recommended Oil: GEAR OIL SAE90# Oil Check Bolt Hole Install the oil check bolt. Make sure that the sealing washer is in good condition. OIL CHANGE Remove the oil check bolt. Remove the oil drain bolt and drain the oil thoroughly. Install the oil drain bolt. Torque: 1.0kg-m Make sure that the sealing washer is in good condition. Fill with the recommended oil. Oil Capacity: At disassembly : 200cc At change : 180cc Reinstall the oil check bolt and check for oil leaks. Oil Drain Bolt/ Sealing Washer Torque: 1.2kg-m DRIVE BELT Remove the left crankcase cover. Inspect the drive belt for cracks or excessive wear. Replace the drive belt with a new one if necessary and in accordance with the Maintenance Schedule. Drive Belt 3-7