1. Kymco
  2. Workshop-manual
  3. mxu 250 300 Workshop-manual
  4. Page 236

mxu 250 300 Workshop-manual : Page 236

Microfiches
Image preview

Page 234

Image preview

Page 235

Image preview
Image preview

Page 237

Image preview

Page 238

1 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170 175 180 185 190 195 200 205 210 215 220 225 230 235 240 245 250 255 260 265 270 275 280 285 290 295 300 305 310 315 320 325 330 335 340 345 350 352 
          13. BRAKE SYSTEM                                                                MXU 300/250

                                                                 Bleed Valve (Front Left Lever)
 BRAKE FLUID REFILLING
 Connect a transparent hose and syringe to
 the brake caliper bleed valve and then
 loosen the bleed valve nut.
 Fill the brake reservoir with brake fluid and
 use the syringe to draw brake fluid into it
 until there is no air bubbles in the hose.
 Then, tighten the bleed valve nut.

 Torque: 0.6 kgf-m (6 Nm, 4.32 lbf-ft)                                                 MXU 250
                                                 Reservoir (Front Left Lever)
   · When drawing brake fluid with the
     syringe, the brake fluid level (pedal)
     should be kept over 1/2 of the brake
     reservoir height.
   · Use only the recommended brake fluid.

                                                 Reservoir (Front Left Lever)




                                                                                        MXU 300
                                                             Bleed Valve (Front Left Lever)



                                                                            Reservoir Cover (Pedal)
 Recommended Brake Fluid: DOT-4




                                                 Reservoir (Pedal)     Reservoir Protection Cover




                                                                                      13-14
 Microfiches.net - Other brands parts catalogues